Electric capstan is a sort of small cost-effective winch used on the deck or on the shore for mooring and anchoring purposes. The rated load and pulling force are generally 0.5T to 10T. The speed can be single speed, double speed, and three speed depending on your requirements. We offer a variety of winches and capstans for all your boating and marine applications.
According to the drive shaft configuration, the machine can be divided into vertical capstan and horizontal capstan. There are pros and cons to each setup.
Vertical capstan – it uses a vertical shaft with the motor and gearbox situated below the unit, usually below decks. Electric vertical capstan allows the machinery to be placed below decks, thus lowering the center of gravity. It also allows a flexible angle of pull so that the rope or chain can be run out to different fair leads. In addition, this type of capstan offers optimal chain control and minimizes slippage and jumping.
Electric vertical winch parameters:
Horizontal capstan – it has an integral gearbox and motor assembly with a horizontal shaft, typically located above-deck. The machine tends to be more self-contained and protects the machinery from the corrosive marine environment.
Horizontal winch for sale parameters:
Which style of electric capstan can best fit your needs? There are two main considerations that can help you decide the right one, deck thickness and underdeck space. And also it depends on your priorities. If you are not sure whether to install a vertical or horizontal capstan, please do not hesitate to contact Aicrane. Our professionals will be more than happy to assist you to select the most suitable one.
Smaller boats tend to use capstans for anchoring and mooring. The device is very easy to install and operate, and also has lower operating cost than a hydraulic capstan. It is a simple and cost-effective option for boat and marine applications. Depending on your boat’s particulars and specific job requirements, we will design a perfect capstan to maximize your work efficiency and safety.
| Type | Warping load (KN） | Warping speed(m/min) | Wire Dia(mm) | Motor power (kw) | |
| Electric | Hydraulic | ||||
| AQ-D(Y)J5 | 5 | ≥18 | φ11 | 3/1.2 | 5.5 |
| AQ-D(Y)J10 | 10 | ≥18 | φ11 | 4.3/1.7 | 7.5 |
| AQ-D(Y)J20 | 20 | ≥18 | φ15 | 7.5/7.5/5 | 15 |
| AQ-D(Y)J30 | 30 | ≥18 | φ17.5 | 16/16/11 | 18.5 |
| AQ-D(Y)J40 | 40 | ≥18 | φ20.5 | 16/16/11 | 18.5 |
| AQ-D(Y)J50 | 50 | ≥18 | φ20.5 | 22/22/16 | 30 |
| AQ-D(Y)J70 | 70 | ≥15 | φ26 | 30/30/22 | 45 |
| AQ-D(Y)J100 | 100 | ≥15 | φ28 | 45/45/30 | 55 |
| AQ-D(Y)J120 | 120 | ≥15 | φ32.5 | 60/60/45 | 75 |
| AQ-D(Y)J150 | 150 | ≥15 | φ36.5 | 60/60/45 | 90 |
| AQ-D(Y)J200 | 200 | ≥15 | φ40 | 75/75/36 | 110 |
| AQ-D(Y)J250 | 250 | ≥12 | φ46 | 75/75/36 | 110 |
Electric horizontal capstan is installed above the deck, so the installation is straight-forward and maintenance is easy. On the other hand, this means the motor is more exposed to the weather conditions.
With vertical capstan, the motor is situated below deck, thus the installation and maintenance is more difficult. However, you don’t have to worry about the weather, but you may have to worry about corrosion in the damp conditions of your anchor locker.
In order to provide you with the right proposal, please let us know the following basic information:
Please fill out the contact form or email your inquiry. We will get back to you soon after receiving your inquiry.
In a word, customer needs and satisfaction are always our top priority. Contact us today to get the most suitable electric capstan for your vessels!